Quality Machining In-Place... Any Place in the World
24-7 phone number: 414-562-2000

Journal Repair Challenge Solved by IPM

Bearing Journal Repair Brings Industrial Vacuum Drum Filter Back to Life

Milwaukee, WI, January 15, 2018 —
A customer in the paper converting industry recently contacted In-Place Machining Company to consider machining a Ø34" X 22" long bearing journal and seal packing area on a vacuum drum filter which separates solids from liquids. When IPM technicians arrived on-site to inspect the damage, it quickly became obvious that this would not be a quick machine and polish job. The damage was so severe that it was not clear whether the journal could be salvaged.

IPM engineers immediately set to work designing an on-site bearing journal repair solution while working with the customer to provide a solution that would quickly bring the unit back on line while also promising maximum longevity. The repair that was settled upon was to machine away the damaged material and install a large diameter sleeve.

While technicians were on-site machining the damaged journal to prepare for installation of the sleeve, a custom press-fit repair sleeve was manufactured at the IPM machine shop in Milwaukee, WI. When the sleeve arrived at the site, IPM technicians heated it using our automated temperature control resistance heating system. IPM technicians followed a carefully planned procedure, the sleeve was installed, secured, and allowed to cool.

When the sleeve had cooled, the O.D. was machined to final size and geometry and the drum filter was placed back into service in a matter of days after first arriving on site. This project’s short schedule was made possible by the close communication and careful planning between IPM and the customer.

Do you have a difficult repair that has been deferred due to the critical nature of the piece of equipment? Don’t wait until the damage becomes too severe to repair, Contact Us or Call IPM Today at 414.562.2000 for a consultation to determine the solution to your maintenance problem.

 
About IPM

In-Place Machining Company is a world leader in providing precision on-site machining and measurement services to a wide range of industrial customers including Mining & Cement Manufacturing; Nuclear, Fossil, Hydro and Wind Power Generation; Steel & Aluminum Production; Marine & Offshore; Pulp & Paper Manufacturing; Petrochemical; Bridge & Infrastructure; General Manufacturing; and Scientific and Military customers. The company’s expertise and technological leadership comes, in part, from our ability to design and develop specialized machine tool systems with capabilities not available on the open market. With over 100 employees in multiple locations, and perhaps the largest inventory of dedicated on-site machining & measurement systems in the world, In-Place Machining Company is ready to serve you In-Place… Any Place In The World.

To find out more about how In-Place Machining Company’s shop machining competencies can benefit you, Contact Us or Call Us Today at 414-562-2000.

Download the PDF File Here

globe