Quality Work Done Safely... It's In Everything We Do
Our Safety Program consists of many aspects be its training programs, certifications, routine meetings, safe equipment technology, and more. Working safely protects employees, equipment, customers, customer assets, and vendors. There is no greater priority than Quality Work Done Safely.
ISNetworld Member Contractor 
IPM is an ISNetworld Member Contractor
NANteL
IPM has its own Verified NANTeL Proctor allowing employees to complete training in advance, affording significant savings. NANTeL is a nationwide system that can deliver nuclear power plant training courses to any computer with internet access.
MSHA
The U.S. Department of Labor’s Mine Safety and Health Administration (MSHA) training programs work to prevent death, illness, and injury from mining and promote safe and healthful workplaces.
OSHA 10 Hour - General Industry
The U.S. Department of Labor’s Occupational Safety and Health Administration (OSHA) Outreach Training Program for General Industry provides training for workers and employers on the recognition, avoidance, abatement, and prevention of safety and health hazards in workplaces in general industry.
OSHA 30 Hour - General Industry
The OSHA 30 Hour – General Industry class is utilized for our supervisors and higher-level workers with increased responsibilities.
OSHA 10 Hour - Maritime
The OSHA Outreach Training Program for the Maritime Industry provides training for workers and employers on the recognition, avoidance, abatement, and prevention of safety and health hazards in workplaces in the maritime industry.
OSHA 10 Hour – Construction
The OSHA 10 Hour Outreach Training Program for the Construction Industry provides training for workers and employers on the recognition, avoidance, abatement, and prevention of safety and health hazards in workplaces in the construction industry. The 10-hour class is intended to provide workers with awareness of common job-related safety and health hazards.
OSHA 30 Hour - Construction
The OSHA 30 Hour – Construction class is utilized for our supervisors and higher-level workers with increased responsibilities.
Fall Protection
Fall Protection training is provided in-shop at IPM to all relevant employees.
Confined Space Entry
Confined Space Entry training is provided in-shop at IPM to all relevant employees.
Aerial Lift Training
Aerial Lifts, Boom, Scissors, and Elevated Work Platforms Operator Safety Training.
CPR/First Aid/AED
IPM employees have American Heart Association Heartsaver® First Aid CPR AED Training to respond appropriately to emergencies. Employees receive routine refreshers.
T-HUET
Tropical Helicopter Underwater Escape Training.
ISNetworld RAVS Plus
RAVS® is a safety compliance standard that stands for “Review and Verification Services”. This standard is used by ISNetworld® as a way to verify everything from insurance documentation, safety protocol development and the effectiveness of safety programs.
RigPass
IADC Rig Pass is a standardized rigging safety orientation program for all oil and gas operations, whether onshore or offshore, that is independently audited and accredited.
SafeGulf
A standardized orientation which sets minimum requirements for the US Offshore E&P Industry. Monitors and continuously improves training standards for the Gulf of Mexico contractor community.
Respirator Fit Tested and Qualified
IPM Technicians are fit, tested, and trained to wear respirators in a wide variety of hazardous environments.
WHMIS
Workplace Hazardous Materials Information System (WHMIS). Workplace Health and Safety Awareness Training is Ontario, Canada’s training requirements for workplace chemicals.
eRailsafe Railway Worker Training
eRailSafe is the Class 1 and ShortLine industry standard for contractor safety and security management for Railroads and the vendors that serve them.
FEC (Florida East Coast Railway)
Safety training is provided for working in the jurisdiction of the FEC (Florida East Coast Railway) which complies with the standards of the Federal Railroad Administration (FRA).
Orientation Plus® (BOP)
Basic Orientation Plus® is a reciprocal contractor safety awareness training program that was designed to meet the classroom training requirements of the standards listed in the Code of Federal Regulations as enforced by the U.S. Department of Labor, Occupational Safety & Health Administration (OSHA) in the components it covers.
Tappisafe
Standardized courses for working in the pulp and paper industry. Pulp and paper safety leaders created the courses, incorporating best practices from mills across the country.
PowerSafe
The PowerSafe utility safety training program provides contractors and employees with essential safety knowledge and tools.
SERE
Survival, Evasion, Resistance, and Escape (SERE) is a program of the US military providing training in evading capture and teaches survival skills.
Antiterrorism
Level I Antiterrorism Awareness Training.
Virginia Ship Repair Association
Training courses for maritime environments are provided by the Virginia Ship Repair Association (VSRA), a trade association representing the ship repair industry in Virginia and the Mid-Atlantic.
Contact IPM Today to See How We Can Help You
Discover the advantage of working with an industry pioneer with over 40 years of machining experience